Replacement Sports Filters

The simplest and most cost-effective way of improving engine performance is to replace the standard paper filter with a high-flow Jetex cotton gauze filter. Filtration is 99% at 2.8 microns, and together with a high dust retention capacity, each filter will perform mile after mile, in any conditions. Also, each filter is washable and reusable so there is no need to buy a new filter at every service!
Search Filter Catalogue 

Direct Air Induction Kits

For a more advanced air intake modification, an induction kit will ensure faster air intake and improved throttle response. Each kit is designed to replace the existing air box (where applicable) with a conical or cylindrical high-flow sports filter, together with all necessary tubing, fittings and fixings. Performance improvement varies depending on each application, but you should expect a few BHP increase.
Search Induction Kit Catalogue 

Conical Filters

For specific car projects where an induction kit is not available, Jetex stock a wide range of conical air filters for air intakes ranging from 8mm to 155mm. Engine capacities up to 490 BHP are catered for so you can be sure that there is a filter available whatever the application! Many cones are available with either rubber or chrome end caps.
View range of conical filters 

Cylindrical Filters

These filters can be used in the same way as Jetex cone filters. The only difference being the shape of the filter. Again, these are ideal for specific car projects where an induction kit is not available. Air intakes ranging from 12mm to 150mm and engine capacities of up to 834 BHP are catered for, so you can be sure that there is a filter available whatever the application! Most cones are available with rubber end caps although there are a few in chrome. Jetex also stock a range of breather filters from 12mm to 16mm intake diameter.
View range of cylindrical filters 

Colour Filters

Each Jetex colour filter is designed to incorporate an inverted cone filter in the end cap to help increase air intake volume. The colour range cones are available in four colours; Black, Blue, Red and Yellow, fit air intakes from 65mm to 100mm and cater for engine capacities of up to 270 BHP.
View range of colour filters 

S-Type Filters

Jetex S-Type filters are ideal for engines using carburettors or vertical injector units. The filter has a large surface area to ensure maximum filtration and will sit on top of intake units ranging from 55mm to 90mm. S-Type filters retail at £33.00 including VAT.
View range of S-Type filters 


DCAF Induction Kits

Engine performance is enhanced with a cold, dense air charge. An addition to Jetex's induction kit range is the direct cold air filtration kit (DCAF), comprising an inverted cone filter and cold air feed that attaches directly to the end of the cone. This allows air to pass straight through the cone filter and into the engine. Faster air flow means increased throttle response and improved engine response. Universal DCAF Kits retail at £117.50 including VAT.
More info on DCAF kits 

AIRFORCE Induction Kits

To keep air temperature even lower, Jetex now supply induction kits with 'carbon look' casings. The Airforce kit is like the DCAF kit, but air is prevented from heating up as it passes through the cone filter. The unique streamlined cone filter supplied with every Airforce kit creates a vacuum to increase air intake speed. Futhermore, a cold air feed is supplied that attaches directly onto the end of the filter and casing. Some kits have been adapted for specific applications, but they are mainly a universal fit and so can be used for a large number of vehicles. Universal AIRFORCE Kits retail at £120.00 including VAT.
More info on AIRFORCE kits Search AIRFORCE Catalogue 

Carbon Induction Kits

Our range of universal fit carbon kits ensures a lightweight solution to keep air temperature as low as possible. Carbon is well known for its heat reflective properties and extraordinary strength. This type of induction kit is yet another step up from the DCAF and Airforce kits where air is prevented from heating up as it passes through the cone filter. The unique streamlined cone filter supplied with every carbon kit creates a vacuum to increase air intake speed. Futhermore, a cold air feed is supplied that attaches directly onto the end of the filter and casing. Universal CARBON Kits retail at £141.00 including VAT.
More info on CARBON kits

Filter Cleaning and other parts

Jetex can supply cleaning solution and oil for servicing your Jetex filter. If you need to know how to clean your filter, please download our filter cleaning instruction sheet. Within this section, you can also buy cold air feed pipes in a variety of pipe diameters.
View cleaning solutions and cold air feed pipes 


New Filter Catalogue August 2007! 

Jetex Filter Catalogue 2007


Jetex Exhaust Catalogue 2007! 

Jetex Exhaust Catalogue 2007


Jetex Custom Exhaust Parts Catalogue 2007! 

Jetex Custom Exhaust Parts Catalogue 2007


See rolling road figures for our new 1.8T downpipe and sports cat